How to Use UPVC Solvent Cement by Plastochem – A Step-by-Step Guide & Common Fixes
UPVC solvent cement by Plastochem is a powerful adhesive used to create leak-proof joints in UPVC pipes and fittings. However, improper use can result in weak bonding, leaks, or unsightly finishes. This guide outlines step-by-step usage instructions, common mistakes, and how to avoid them for a successful, durable installation. ✅ Step-by-Step Guide to Apply UPVC Solvent Cement Step 1: Surface Preparation Clean the outer surface of the pipe and the inner surface of the fitting using a clean cloth. Remove dust, grease, oil, and moisture completely. For best results, apply a primer to prep the surface and improve bonding. Step 2: Cement Application Stir the UPVC solvent cement gently. Apply an even, thin layer of cement to both surfaces using a proper applicator or brush. Ensure full coverage without over-applying. Step 3: Joining the Pipes Immediately after applying the cement, push and twist the pipe into the fitting. Hold the joint firmly for at least 30 seconds to allow i...